Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20030827-JPSNAP #0: Wed Aug 27 00:47:45 GMT 2003 root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc077b000. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc077b294. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc077b348. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc077b3f4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.95-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff real memory = 536346624 (511 MB) avail memory = 512794624 (489 MB) Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fdf10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 29 INTA is routed to irq 10 pcib0: slot 31 INTB is routed to irq 10 pcib0: slot 31 INTB is routed to irq 10 agp0: mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib1: slot 0 INTA is routed to irq 10 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 10 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 pcib2: slot 2 INTA is routed to irq 10 pcib2: slot 3 INTA is routed to irq 5 pcib2: slot 5 INTA is routed to irq 10 pcib2: slot 8 INTA is routed to irq 10 cbb0: irq 10 at device 2.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcm0: port 0x3800-0x38ff irq 5 at device 3.0 on pci2 pcm0: failed to enable memory mapping! pcm0: malloc() of "64" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "64" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 malloc() of "16" with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc40b34c0) locked @ /usr/src/sys/dev/sound/pcm/mixer.c:322 fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xe8200000-0xe8203fff,0xe8206000-0xe82067ff irq 10 at device 5.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:b8:04:01:01:ec:f1 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 if_fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:b8:01:ec:f1 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: port 0x3c00-0x3c3f mem 0xe8205000-0xe8205fff irq 10 at device 8.0 on pci2 fxp0: Ethernet address 00:e0:b8:50:23:7b miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1820-0x182f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe8000000-0xe80003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.6 (no driver attached) acpi_lid0: on acpi0 ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node 0xc4065bc0), AE_NOT_EXIST acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_button0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: port 0x66,0x62 on acpi0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: